Manley Massive Passive
Tuotenumero 1072506MASSIVE PASSIVE on kaksikanavainen ja neljäalueinen EQ
Toimitettavissa noin 8-12 arkipäivässä
Maksa heti, laskulla tai osamaksulla - Tallenna kortti ja pankkitili - Helppo ja turvallinen - Klarnan ostajan suoja
€6111,00/kpl
SPECIFICATIONS 2020 Version Driven by MANLEY POWER®
- Inputs: Balanced XLR & 1/4” (accepts unbalanced)
- Outputs: Balanced XLR (accepts unbalanced) & Unbalanced 1/4”
- Level +4 dBu nominal
- Bypass Switch bypasses EQ & tube circuits: 1/4” Jacks (not hardwire)
- Bypass Switch bypasses EQ, tube circuits & Input Buffer: XLR Jacks (Hardwire Bypass)
- Gain Trim: -6dB - 0dB - +4dB
- 44 Frequencies (roughly 1/4 octave spacing)
- Frequency Range: 22 Hz to 27 kHz
- EQ Boost/Cut Range : Maximum 20 dB boost or cut
- Nominal Q range: 1.5 to 3 (uniquely active in shelf modes)
- Maximum Input Level: +21dBu
- Maximum Output Level (1kHz sine, 1% THD+N, BW 22Hz-22kHz, Load 100kOhms): +35dBu
- Frequency Response (@ +4dBu, Load 100kOhms): -0.1 dB @ 10Hz, -1 dB @ 60 kHz
- Total Harmonic Distortion (THD+N) (1kHz sine @ +4dBu, BW 22Hz-22kHz): 0.006%
- Output Headroom (Reference to +4dBu): 31dB
- Dynamic Range (Reference to Maximum Output): 123 dB
- Noise Floor Typical (Unity Gain): -88 dBu (A-Weighted)
- Signal to Noise Ratio (Reference to +4 dBu, BW 22Hz-22kHz): 92dB
- Input Impedance: 20kOhm
- Output Impedance: 150 Ohm
- Tube Complement: 2 x 5751, 4 x 6922
- Auto-mute warmup delay = 20 seconds
- Power Consumption (120/240VAC): 44 watts
- Mains Voltage & Frequency (VAC/Hz): Internal Universal Power Supply 90-254 VAC / 50-60Hz
- Size (3U): L 19” x W 10” x H 5.25”
- Unit Weight: 15.5 Lbs.
- Shipping Box: L 23” x W 15” x H 10”
- Shipping Weight: 26 Lbs.
FEATURES
- All-Passive tone sculpting circuitry
- Unique Shelf curves use the "bandwidth" control
- Overlapping and Interleaved Frequency choices
- Every band switchable to shelf or bell
- Vacuum tube make-up gain and line drivers
- Parallel symmetrical topology
- Premium components throughout
- Passive HP and LP Filters plus gain trims
- Units built after 2016 or 2017 MK2 revision have Hardwire Bypass.